Shure BLX288/PG58 Dual-Channel Wireless Handheld Microphone System with PG58 Capsules H10
$549.00
BLX288/PG58-H10 Wireless Dual Vocal System with two PG58 Handheld Transmitters
Availability:
In stock
SKU
SHU-BLX288-PG58-H10
Overview
Shure BLX® Wireless Systems combine professional-quality sound with simple setup and an intuitive interface for legendary audio performance right out of the box. Precision-built and available in a variety of configurations, it’s the most accessible way to own the stage.
Includes 2 PG58 handheld transmitters, BLX88 dual-channel receiver, 2 microphone clips, power supply, 4 AA batteries, and user guide.
BLX88 Diversity Receivers
Overview
Single channel wireless receiver with microprocessor-controlled internal antenna diversity.
Features
- Up to 12 compatible systems per frequency band (region dependent)
- Microprocessor-controlled internal antenna diversity
- One-touch QuickScan frequency selection quickly locates the best frequency
- 1/4" and XLR audio outputs
- Two color audio status indicator LED
Specifications
| Output Impedance | |
| XLR connector | 200 Ω |
| 6.35 mm (1/4") connector | 50 Ω |
| Audio Output Level | |
| XLR connector | –27 dBV (into 100 kΩ load) |
| 6.35 mm (1/4") connector | –13 dBV (into 100 kΩ load) |
| RF Sensitivity | 105 dBm for 12 dB SINAD, typical |
| Image Rejection | >50 dB, typical |
| Dimensions (H x W x D) | 1.50 in. X 12.13 in. X 3.98in. (38 mm X 308 mm X 101 mm) |
| Weight | 15.1 oz. (429 g) |
| Housing | Molded ABS |
| Power Requirements |
12–15 V DC @ 235 mA |
BLX2/PG58
Overview
Professional-quality microphone capsule for lead and backup vocal performance applications
Features
- LED Indicator
- Displays power and battery status (see Transmitter LED Indicators).
- Power Button
- Push to turn power on or off.
- Group Button
- Changes group setting.
- Channel Button
- Changes channel and gain setting.
- LED Display
- Displays group and channel setting.
- Identification Cap
- Battery Compartment
- Transmitter LED Indicators
Transmitter LED Indicators
| LED Indicator | Status |
| Green | Ready |
| Rapidly Flashing Red | Controls locked |
| Solid Red | Battery power low (less than 1 hour remaining*) |
| Flashing Red and shuts off | Batteries dead (change batteries to power on transmitter) |
Specifications
| Audio Input Level | |
| 0dB | 20 dBVmaximum |
| -10dB | 10 dBVmaximum |
| Gain Adjustment Range | 10 dB |
| RF Transmitter Output | 10 mW, typical |
| Dimensions | 8.82 in. X 2.09 in. (224 mm X 53 mm) L x Dia. |
| Weight | 7.7 oz. (218 g) without batteries |
| Housing | Molded ABS |
| Power Requirements | 2 LR6 AA batteries, 1.5 V, alkaline |
| Battery Life | up to 14 hours (alkaline) |
Frequency Range and Transmitter Output Level
| Band | Range | Output Power |
| H10 | 542 to 572 MHz | 10 mW |
Specifications
Operating Range: 300 ft (91 m) line of sight(actual range depends on RF signal absorption, reflection and interference)
Available Frequencies: Between 542 to 572 MHz (available frequencies depend on applicable regulations in country where system used)
Audio Range: 50 – 15,000 Hz (dependent on microphone type)
Transmitter RF Output Power: 10 mW, typical (varies by region)
Audio Output Connector: XLR and 1/4" (6.3 mm)
unbalanced Maximum Output Level: -27 dBV (XLR, mic level), -13 dBV (1/4")
Battery Life: Up to 14 hours
Dynamic Range: 100 dB A-weighted
System Distortion: 0.5% THD typical (ref. +/- 38 kHz deviation, 1 kHz tone)
Operating Temperature Range: -18°C (0°F) – +50°C (122°F)
Power Requirements: BLX88: 12 – 18 V DC at 320 mA, supplied by external power supply
Write Your Own Review
Check items to add to the cart or
