Calrad Extender IR 6X Emitter Kit

Overview

92-160 | IR Repeater Kit, 6 Port Distribution System

IR connecting hub with a wired receiver that terminates to a (3.5mm stereo plug). A terminal block is also provided to support wired type receiver connections if needed. The 92-160 is designed to simplify the connection of IR receivers and emitters for IR signal distribution. The 92-160 has the ability to send IR signals to 6-sources using a single emitter or up to 12 or more sources if double or triple IR emitters are used. Three colored L.E.D indicators are provide on the distribution block that show power (RED L.E.D.), IR Signal (Blue L.E.D.) and IR Status (Green L.E.D.). If using more than one receiver on a distribution block isolation diodes will be required, please click on the resources tab and select the multiple receivers application note under Application notes for a multiple Receiver connectivity diagram.

Tech Notes:

1. Some set top boxes, AV equipment may not respond to standard flashing emitters, use a non-flashing IR-Ultraviolet emitter to solve the issue, Calrad 92-152-NF

Features:

• Send signals to 6 or more emitters
• Detachable IR Receiver input connector
• Power, Ground, Status and Signal
• IR Receiver input jack .125" (3.5mm)
• 12Vdc powered
• (Blue) IR Signal Confirmation LED
• (Red) Power LED
• (Green) Status Confirmation L.E.D.
• Quick Mount
• Sleek thin receiver design

Specifications:

• Includes: 1 x Distribution Block, 1 x Surface Mount Receiver, 3 x IR Emitters, 1 x 12Vdc, 300ma Power Supply (Positive Center)
• 2.1mm Coax Jacks: 12Vdc Power, Status+12Vdc Input
• IR Frequency: (34-60Khz)
• (6) Ports: 0.125" (3.5mm) Mono IR Emitter outputs
• (1) IR Receiver connectors: Detachable: 4-conductor phoenix plug, 3.5mm stereo IR Receiver Input jack
• Dimensions: IR Receiver: 1.77” (L) x 0.56” (W) x 0.52" (H)
• Dimensions, Distribution Block: 1.95" (L) x 2.25" (W) x 0.98" (H)
• Distribution Block Weight: 6 oz.
• Color: Black